Weekly Raw Steel Production Increases Slightly

September 17, 2012 Posted by Steel Market Intelligence

Weekly domestic raw steel production for the week ending September 1, 2012 increased a nominal 0.3% to 1.817 million tons (mt) from last week’s 10-month low of 1.811 mt, but was down 3.6% year-on-year.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated – using prior months’ reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Capacity utilization increased to 73.5% this week, slightly above last week’s 73.3% but well below the year-ago level of 77.0%.

The lowest production level since the recession began was 800,000 tons for the week of December 27, 2008, while the highest level was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

Source: AISI and Steel Market Intelligence

HRC, Coated Lead Times Move Up, CRC Flat

September 17, 2012 Posted by Steel Market Intelligence

Official HRC lead times for the week ending September 9 moved to 4.1 weeks from 3.9 in the previous week with some sources reporting that lead times are even shorter.

Lead times for HDG also moved up to 6.2 from last week’s level of 6 weeks while CRC lead times remained flat week-on-week at 6.4 weeks.

Sources: The Steel Index, Steel Business Briefing

Join SMI Group on LinkedIn Today—Get a Free Trial to Our Research!

September 17, 2012 Posted by Steel Market Intelligence

Steel Market IntelligenceWe write and talk about the global and U.S. steel markets in our LinkedIn group, Steel Market Intelligence.

Join to receive news and analysis on the steel industry and a free trial to SMI research!

Clink the link or logo to join.

U.S. Rig Count Flat, Canada Moves Up Again

September 14, 2012 Posted by Steel Market Intelligence

The number of active oil and natural gas rigs in the United States remained at 1,864 for the week ending September 14, 2012 and was 6.1% below the year-ago level – remaining at the lowest levels since June 2011.

The highest weekly rig count in the United States since 1940 was recorded on December 28, 1981, at 4,530; the lowest was recorded on April 23, 1999, at 488.

The number of rigs in Canada increased this week by 2.6% to 354 compared with 345 last week but was down 29.5% from the year-ago level.

The highest rig count for Canada was 727 on February 3, 2006; the lowest was 29, recorded on April 24, 1992.

Source: Baker Hughes Inc.

Join Steel Equity Researchers Group on LinkedIn for News, Analysis, and Forecasts!

September 14, 2012 Posted by Steel Market Intelligence

Steel Equity Researchers on LinkedInIn our Steel Equity Researchers on LinkedIn, we post curated news articles about the steel industry, manufacturing, and the economy. We also provide analysis and forecasts you won’t find anywhere else.

All new members who are qualified institutional investors will receive a free trial to Steel Market Intelligence’s reports and expert analysis on steel equities.

Click the link or logo to join.

Steel Market Production Changes – September 13, 2012

September 13, 2012 Posted by Steel Market Intelligence

Steel Market Production Increases – Ilva will present a plan to prosecutors next week on improving environmental protection at their Taranto Steelworks, located inItaly. The Italian government and the EU have issued statements committing to keeping the mill open.

Steel Market Production Increases – Anhui Changjiang Iron & Steel has begun trial runs of its new 1.1m tpy bar rolling mill in eastern China.

Steel Market Production Increases – Venezuelan steelmaker Sidor resumed production at its slab mill following an EAF explosion. The 870,000 tpy mill is currently operating with only 4 of 5 furnaces running at low production levels, but does not expect shipments to be affected.

Steel Market Production Increases – Chinese steelmaker Liuzhou currently has no plans to restart its No. 5 & 6 blast furnaces due to a negative market outlook – the furnaces have been down for “maintenance” since July and August for a total crude steel output reduction of 8,000 tonnes per day.

Steel Market Production Increases – Russian steelmaker Amurmetal plans to increase billet production to 60,000 tonnes in the month of September, compared with 40,000 tonnes in July and August.

Steel Market Production Increases – Spanish steelmaker Alfonso Gallardo Group announced the intent to continue operating their rebar mill in the north of Spain which has not been in operation since June due to a strike.

Steel Market Production Increases – The first phase of Baosteel’s OCTG project in Karamay,China began production on Wednesday, with annual capacity of 60,000 mt.

Sources: Steel Business Briefing, SteelOrbis

 

Steel Market Production Changes – September 11 & 12, 2012

September 12, 2012 Posted by Steel Market Intelligence

Steel Market Production Cuts – ArcelorMittal Spain has reportedly not made a decision yet on whether or not to restart steelmaking operations on blast furnace B at its Gijon plant after taking it down for maintenance work that is scheduled to end Sept. 25.

Steel Market Production Cuts – Japanese steelmaker Nippon Steel has reportedly cut H-beam output by an undisclosed amount to preserve prices and reduce dealer inventories.

Steel Market Production Cuts – South Korean steelmaker Hyundai Steel is planning to suspend production at the “large-size mill” at its Incheon Plant for a period of 14 days from Sep. 23 – Oct. 6 and at its “small size mill” and rebar mill for 7-10 days at the same location in order to cut output.

Steel Market Production Cuts – South Korean steelmaker Hyundai Steel plans to cut production at its Pohang bar mill and its Dangjin Plants rebar mill for 7 -10 days this month.

Steel Market Production Cuts – South Korean steelmaker Dongkuk Steel plans to stop production at its No. 1 & 2 rolling mills for a full week in September.

Steel Market Production Cuts – South Korean steelmakers KISCO and HANSCO plan to shut down their plants for a full week in September.

Steel Market Production Cuts – South Korean steelmaker Daehan Steel plans to stop production for 8 days in September.

Steel Market Production Cuts – South Korean steelmaker YK Steel plans to shut down its No. 1 & 2 steelmaking mills for 4 and 7 days in September and their No. 1 & No. 2 rolling mills are scheduled to be down for two days.

Steel Market Production Increases – Italian steel plant maker Danieli plans to restart semi-finished production at a limited rate at its 500,000 tpy capacity Sisak Works in Croatia this October or November.

Sources: Steel Business Briefing, MetalBulletin, SteelOrbis

 

Advance/Decliner Index Falls to 2-Month Low; Stress in the US but Green Shoots in China?

September 11, 2012 Posted by Steel Market Intelligence

New Report Preview

Our Advance/Decliner Index declined for the fourth consecutive week to an eight-week low after surpassing the critical 50% level just four weeks ago. Our Ex-China Index …more

For a copy of our full report and a free trial subscription, please contact us.

Baosteel Holds the Line on October Sheet Prices – Good News for Global Steel Industry

September 11, 2012 Posted by Steel Market Intelligence

New Report Preview

Baosteel announced unchanged sheet prices for October shipments overnight, which is a real plus for the global steel industry for the following reasons….more

For a copy of our full report and a free trial subscription, please contact us.

 

August Chinese Steel Production Drops

September 11, 2012 Posted by Steel Market Intelligence

New Report Preview

Final August Chinese steel production came out overnight at 1.89 million tonnes per day (mtpd), down a whopping 5% from July’s 1.99 mtpd, down some 6% from… more

For a copy of our full report and a free trial subscription, please contact us.