Archive for: ‘November 2013’

Domestic Raw Steel Production, Capacity Utilization Increase

November 19, 2013 Posted by Steel Market Intelligence

Weekly domestic raw steel production increased 1.5% from 1.829 million tons (mt) last week to 1.856 mt for the week ending November 16, 2013 and is some 3.6% above the year-ago level of 1.792 mt.

Capacity utilization also rose from 76.3% last week to 77.5% this week, and is also above the year-ago level of 72.5%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Source: AISI and Steel Market Intelligence

Iron Ore Price Increases, Remains at Almost Three-Month High

November 18, 2013 Posted by Steel Market Intelligence

The spot reference price for 62% Fe iron ore cfr North China rose for the third consecutive week, up 0.7% from $135.90 last week to $136.80 for the week ending November 15, 2013, remaining at the highest price since August 30, 2013.

The spot price for iron ore averaged $120.57 in 4Q12, $148.16 in 1Q13, $125.76 in 2Q13, and $132.57 in 3Q13; the full-year 2012 average was $128.30.

The post-recession low was $59.10 on March 27, 2009, while the high was $191.90 on February 17, 2011.

Source: The Steel Index

U.S. Rig Count Climbs for Third Week, Canadian Count Jumps

November 18, 2013 Posted by Steel Market Intelligence

The number of active oil and natural gas rigs in the United States rose for the third consecutive week, up 0.5% from 1,754 to 1,762 for the week ending November 15, 2013, reaching a two-month high.  Despite the increase, the count is some 2.6% below the year-ago level of 1,809.

The highest weekly rig count in the United States since 1940 was recorded on December 28, 1981, at 4,530; the lowest was recorded on April 23, 1999, at 488.

The number of rigs in Canada jumped 6.1% from 378 to 401 this week, just three less than the recent seven-month high on October 25.  The count is also 4.4% above the year-ago level of 384.

The highest rig count for Canada was 727 on February 3, 2006; the lowest was 29, recorded on April 24, 1992.

Source: Baker Hughes Inc.

Domestic Raw Steel Production, Capacity Utilization Slide Downwards

November 12, 2013 Posted by Steel Market Intelligence

Weekly domestic raw steel production decreased 0.2% from 1.833 million tons (mt) last week to 1.829 mt for the week ending November 9, 2013, sliding back towards the recent seven-month low.  Production still remains some 4.8% above the year-ago level of 1.746 mt.

Capacity utilization also fell from 76.5% last week to 76.3% this week, but is above the year-ago level of 70.7%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Source: AISI and Steel Market Intelligence

Iron Ore Price Remains at Two-Month High

November 11, 2013 Posted by Steel Market Intelligence

The spot reference price for 62% Fe iron ore cfr North China rose 0.4% from $135.30 last week to $135.90 for the week ending November 8, 2013, remaining at the highest price since August 30, 2013.

The spot price for iron ore averaged $120.57 in 4Q12, $148.16 in 1Q13, $125.76 in 2Q13, and $132.57 in 3Q13; the full-year 2012 average was $128.30.

The post-recession low was $59.10 on March 27, 2009, while the high was $191.90 on February 17, 2011.

Source: The Steel Index

U.S. Rig Count Continues to Climb, Canadian Count Decreases Again

November 11, 2013 Posted by Steel Market Intelligence

The number of active oil and natural gas rigs in the United States rose 0.7% from 1,742 to 1,754 for the week ending November 8, 2013, increasing for the second week from a seven-month low and becoming a one-month high.  Despite the increase, the count is still some 2.9% below the year-ago level of 1,806.

The highest weekly rig count in the United States since 1940 was recorded on December 28, 1981, at 4,530; the lowest was recorded on April 23, 1999, at 488.

The number of rigs in Canada decreased 4.0% from 394 to 378 this week, falling for the second week from a seven-month high.  Despite the decrease, the count is still 2.2% above the year-ago level of 370.

The highest rig count for Canada was 727 on February 3, 2006; the lowest was 29, recorded on April 24, 1992.

Source: Baker Hughes Inc.

Domestic Raw Steel Production, Capacity Utilization Climb from Seven-Month Low

November 5, 2013 Posted by Steel Market Intelligence

Weekly domestic raw steel production increased 0.9% from 1.817 million tons (mt) last week to 1.833 mt for the week ending November 2, 2013, rising slightly from last week’s seven-month low.  Production remains some 7.4% above the year-ago level of 1.707 mt.

Capacity utilization also increased from the seven-month low of 75.8% last week to 76.5% this week, and is above the year-ago level of 69.1%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Source: AISI and Steel Market Intelligence

Iron Ore Price Reaches Two-Month High

November 5, 2013 Posted by Steel Market Intelligence

The spot reference price for 62% Fe iron ore cfr North China rose 1.5% from $133.30 last week to $135.30 for the week ending November 1, 2013, reaching the highest price since August 30, 2013.

The spot price for iron ore averaged $120.57 in 4Q12, $148.16 in 1Q13, $125.76 in 2Q13, and $132.57 in 3Q13; the full-year 2012 average was $128.30.

The post-recession low was $59.10 on March 27, 2009, while the high was $191.90 on February 17, 2011.

Source: The Steel Index

U.S. Rig Count Climbs from Seven-Month Low, Canadian Count Decreases

November 4, 2013 Posted by Steel Market Intelligence

The number of active oil and natural gas rigs in the United States rose 0.2% from 1,738 to 1,742 for the week ending November 1, 2013, climbing slightly from last week’s seven-month low.  The count is also some 3.2% below the year-ago level of 1,800.

The highest weekly rig count in the United States since 1940 was recorded on December 28, 1981, at 4,530; the lowest was recorded on April 23, 1999, at 488.

The number of rigs in Canada decreased 2.5% from 404 to 394 this week.  Despite the decrease, the count is still 2.9% above the year-ago level of 383.

The highest rig count for Canada was 727 on February 3, 2006; the lowest was 29, recorded on April 24, 1992.

Source: Baker Hughes Inc.