Archive for: ‘October 2012’

Daily Steel Market Production Report – Coiled-Bar: Made in Taiwan?

October 24, 2012 Posted by Steel Market Intelligence

Steel Market Production Increases – Taiwanese steelmaker Wei Chih Steel has ordered a new 500,000+ tpy coiled-bar line for the bar mill in Tainan and plans to begin production by year-end 2013.

Sources: SteelOrbis

Commercial Metals (CMC) – Good Results with Global Trading Group Dragging; Seasonal Slowdown in NovQ – Thoughts from the AugQ Conference Call

October 24, 2012 Posted by Steel Market Intelligence

New Report Preview:

Commercial Metals (CMC) reported AugQ earnings of $0.26/share, which adjusted to $0.21/share excluding non-recurring items, below the Street’s $0.28/share …more

For a copy of our full report and a free trial subscription, please contact us.

September ABI Highest in Two Years – Multi-Family Residential Hits Highest Since December 2005

October 24, 2012 Posted by Steel Market Intelligence

New Report Preview:

The American Institute of Architects’ (AIA) ABI Index – a leading indicator of non-residential construction activity – rose for the fourth consecutive month in September, and for …more

For a copy of our full report and a free trial subscription, please contact us.

September Imports Dry Up While Asia Floods In

October 24, 2012 Posted by Steel Market Intelligence

New Report Preview:

September preliminary imports declined a nominal 1.4% to 2.4 million tons (mt) for a five-month low, and down some 22.4% from the peak in April. There were meaningful …more

For a copy of our full report and a free trial subscription, please contact us.

Daily Steel Market Production Report – Eastern Europe Increases While the West Cuts

October 23, 2012 Posted by Steel Market Intelligence

Steel Market Production Cuts – ArcelorMittal announced that the Dunkirk, France facility’s #2 blast furnace will remain idled until at least the end of 1Q13, extending the original target of three months from August. The facility is expected to produce 6.1 mt this year, or about 90% of capacity, despite the shutdown.

Steel Market Production Increases – Russian steelmaker Mechel has restarted the 810,000 tpy billet plant in Otelu Rosu,Romania following a one-month outage.

Steel Market Production Increases – Ukrainian steelmaker Interpipe plans to increase production to 80-85% of capacity at the new EAF billet/bloom plant in Dnepropetrovsk, with output reaching 90,000 tpm – or 1.08 mtpy – in December and nearing nameplate capacity of 1.32 mtpy in mid-2013.

Sources: Steel Business Briefing

Daily Steel Market Production Report – ArcelorMittal Invests in Luxembourg

October 22, 2012 Posted by Steel Market Intelligence

Steel Market Production Increases – ArcelorMittal plans to upgrade the EAF at the 1 mtpy Esch-Belval, Luxembourg facility, increasing its capacity by over 10%.

Steel Market Production Cuts – Argentinian steel producer Ternium Siderar will idle one of two blast furnaces – about half of the plant’s 3.89 mtpy capacity – for approximately four months.

Steel Market Production Cuts – Japanese steelmaker Tokyo Steel commented that it had no plans to re-start the 1.8 mtpy pickling line at the Tahara works after it was damaged by a fire, and it might not be re-started until year-end.

Steel Market Production Increases – Peruvian steelmaker Aceros Arequipa plans to increase the company’s 900,000 tpy longs capacity by adding an additional 650,000 tpy rolling mill by year-end.

Steel Market Production Increases – Danish plate processor Dansteel announced a plan to “revamp” their new rolling mill, increasing capacity to 550,000 tpy.

Steel Market Production Increases – Palestinian steelmaker Hassouneh Group will begin production at a new 300,000 tpy EAF facility in Jordan by 2Q13.

Sources: Steel Business Briefing

Domestic Raw Steel Production Falls Again at a Lesser Pace

October 22, 2012 Posted by Steel Market Intelligence

For the week ending October 20, 2012, weekly domestic raw steel production declined 0.8% to 1.722 million tons (mt), the fourth consecutive week setting a new low (post-Jan 2011), and some 14.1% below May’s peak. Over this four week period, however, the rate of decline has lessened with each week – from the first decrease of 2.4% to 1.3%, 1.2%, and now 0.8%.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Capacity utilization fell again to 69.7% this week, below last week’s 70.3% and like production, is at the lowest level since January 2011.

The lowest production level since the recession began was 800,000 tons for the week of December 27, 2008, while the highest level was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

Source: AISI and Steel Market Intelligence

September Global Steel Production Posts Weaker-than-Seasonally-Normal Uptick

October 22, 2012 Posted by Steel Market Intelligence

New Report Preview:

September average daily steel production rose 3.3%, less than the typical increase of nearly 5%, driven by weaker-than-normal global production with the exception of …more

For a copy of our full report and a free trial subscription, please contact us.

Iron Ore Prices Increase Modestly

October 22, 2012 Posted by Steel Market Intelligence

The spot reference price for 62% Fe iron ore cfr North China was up 0.7% to $115.30 for the week ending October 19, 2012, after increasing 9.9% the week before, and is now 29.6% higher than the recent low of $89.00 on 9/7/2012. Despite opening the week down, falling 1.7% to $112.60/ton, the price rebounded and hovered slightly above $115 for the final three days of the week.

For the first quarter of 2012, the spot price for iron ore averaged $141.84, and for 2Q, $139.35; this compares to an average of $176.90 for 1H 2011 and $167.59 for full-year 2011.

The post-recession low was $59.10 on March 27, 2009, while the high was $190.19 on February 17, 2011.

Source: The Steel Index

U.S. Rig Count Stops the Bleeding After 9 Weeks of Decline

October 19, 2012 Posted by Steel Market Intelligence

The number of active oil and natural gas rigs in the United States rose by 4 to 1,839 for the week ending October 19, 2012, up 0.2% from the previous week but down some 8.6% from a year-ago.

The highest weekly rig count in the United States since 1940 was recorded on December 28, 1981, at 4,530; the lowest was recorded on April 23, 1999, at 488.

The number of rigs in Canada fell 1.6% to 355 from 361 last week, and was 28.6% below the year-ago level.

The highest rig count for Canada was 727 on February 3, 2006; the lowest was 29, recorded on April 24, 1992.

Source: Baker Hughes Inc.