Posts Tagged: ‘steel production’

Domestic Raw Steel Production, Capacity Utilization Back Up

July 9, 2013 Posted by Steel Market Intelligence

Weekly domestic raw steel production rose 3.0% from 1.822 million tons (mt) last week to 1.876 mt for the week ending July 6, 2013, and is some 0.4% above the year-ago level of 1.869 mt.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Capacity utilization also increased, rising from 76.1% last week to 78.3%, which is above the year-ago level of 75.6%

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

Source: AISI and Steel Market Intelligence

July Scrap Prices Snap Back from Recent Lows

July 3, 2013 Posted by Steel Market Intelligence

New Report Preview:

According to just-published data from American Metal Market, July prime scrap rose $30/ton (+7.9%) to $410 and shredded gained $16/ton (+4.4%) to $376/ton. The relative…

For a copy of our full report, please contact us.

June Steel Imports Drop to Four-Month Low; Impact from OCTG Trade Case Could Be Felt Soon

July 2, 2013 Posted by Steel Market Intelligence

New Report Preview:

June steel import licenses declined 10.1% to 2.33 million tonnes (mt) from May’s 2.59 mt driven by declines for…

For a copy of our full report, please contact us.

Nucor Holds Long Prices Flat Ahead of Scrap Settlement; Another Nail in the Surcharge Coffin

July 2, 2013 Posted by Steel Market Intelligence

New Report Preview:

In a leading move, Nucor announced July bar pricing – the company is keeping rebar and merchant bar prices unchanged for July shipments, despite shredded scrap prices…

For a copy of our full report, please contact us.

Domestic Raw Steel Production, Capacity Utilization Halt Three-Week Upward Trend

July 2, 2013 Posted by Steel Market Intelligence

Weekly domestic raw steel production decreased 3.1% from 1.881 million tons (mt) last week to 1.822 mt for the week ending June 29, 2013, halting a three-week upward trend and falling some 3.1% from the year-ago level of 1.881 mt.  We suspect the drop is mainly driven by the blast furnace outage at AK Steel’s Middletown Works.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Capacity utilization also decreased for the first time in three weeks, dropping from 78.5% last week to 76.1%, the same as level asa year-ago.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

Source: AISI and Steel Market Intelligence

Advance/Decliner Index Rising but Still Weak; Chinese Pricing Declines

July 1, 2013 Posted by Steel Market Intelligence

New Report Preview:

Our Advance/Decliner Index rose for the fourth straight week. The increase was driven by our Ex-China Index rising to a 15-week high, while our China Index…

For a copy of our full report, please contact us.

ArcelorMittal Leads Round 3 of Sheet Price Hikes

June 26, 2013 Posted by Steel Market Intelligence

New Report Preview:

As we expected, ArcelorMittal is leading a third round of sheet price increases with a $20/ton price hike, lifting its HRC list price to $650/ton, just two weeks after…

For a copy of our full report, please contact us.

Advance/Decliner Index Continues Up; China Index at Four-Month High

June 25, 2013 Posted by Steel Market Intelligence

New Report Preview:

Our Advance/Decliner Index rose for the third straight week to the highest level in three months. The increase was driven by our China Index which rose to a four-month high…

For a copy of our full report, please contact us.

May Imports Rise to 11-Month High; Hot-Rolled Sheet Lowest Since February 2011

June 25, 2013 Posted by Steel Market Intelligence

New Report Preview:

Preliminary May imports rose 4.6% from 2.68 million tons(mt) in April to 2.8 mt, the highest level since last June. The increase was primarily driven by…

For a copy of our full report, please contact us.

Domestic Steel Production, Capacity Utilization Increase for Third Week in a Row

June 25, 2013 Posted by Steel Market Intelligence

Weekly domestic raw steel production rose for the third consecutive week, climbing 0.6% to 1.881 million tons (mt) for the week ending June 22, 2013, and is some 1.5% above the year-ago level of 1.854 mt.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Capacity utilization also rose for the third straight week, rising to 78.5% from 78.1% last week, and was higher than the year-ago level of 75.0%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

Source: AISI and Steel Market Intelligence