Posts Tagged: ‘global steel’

Steel Market Production Report – Italian Steel Producers Suffering from Tough European Market

November 26, 2012 Posted by Steel Market Intelligence

Steel Market Production Cuts – Italian steel company Lucchini will suspend production of the 2.4 mtpy blast furnace at the Piombino longs facility due to “declining demand” and will not resume operations until after the holidays at the earliest.

Steel Market Production Cuts – Italian steelmaker Beltrame will not resume production at the 800,000 tpy EAF in Turin until year-end; two rolling mills for merchant bar are currently operating at 70% of capacity at the facility(650,000 tpy).

Steel Market Production Cuts – Italian steelmaker Beltrame announced that it will close the 110,000 tpy Marghera special sections mill with no plans to re-open it in the future.

Steel Market Production Cuts – Days after announcing a stoppage of the DEMZ facility in Ukraine, Russian steelmaker Mechel is idling all production in Romania due to “unfavorable prices” and intends to divest all five of the company’s Romanian plants.

Steel Market Production Increases – Indian steelmaker Tata announced a restructuring plan for the company’s UK operations, which includes restarting both the Port Talbot blast furnace No. 4 and the 3.3 mtpy Llanwern hot strip mill.

Sources: Steel Business Briefing

Iron Ore Price Falls After Six Weeks of Gains

November 26, 2012 Posted by Steel Market Intelligence

The spot reference price for 62% Fe iron ore cfr North China declined for the first time since late September, falling 3.2% to $118.90 for the week ending November 23, 2012, and is at the lowest level in five weeks. However, the price is still some 33.6% higher than the recent low of $89.00 on 9/7/2012.

The spot price for iron ore averaged $141.84 in 1Q, $139.35 in 2Q, and $112.12 in 3Q; this compares to an average of $167.59 for full-year 2011.

The post-recession low was $59.10 on March 27, 2009, while the high was $190.19 on February 17, 2011.

Source: The Steel Index

HRC Lead Times Post Largest Decline in 9 Weeks

November 23, 2012 Posted by Steel Market Intelligence

HRC lead times for the week ending November 18 fell to 3.0 from last week’s level of 3.8 – the largest week-on-week decline in 9 weeks and the shortest lead times in 6 weeks.

CRC lead times also fell – coming in at 6.1 weeks, down from 6.3 in the week prior. HDG lead times posted the lone increase – jumping to a three-month high of 6.5 from 6.1 in the previous week.

Sources: The Steel Index, Steel Business Briefing

HRC = Hot Rolled Coil
CRC = Cold Rolled Coil
HDG = Hot Dipped Galvanized

Steel Market Production Report – Chinese Pipemaker TPCO Slates Start-up Date for US Plant

November 23, 2012 Posted by Steel Market Intelligence

Steel Market Production Increases – Chinese pipemaker TPCO America aims to begin production at the pipe and end-finishing facilities in Gregory, Texas by mid-2013, with the seamless pipe rolling mill and EAF expected to start operations in late 2014.

Steel Market Production Cuts – Russian steel company Mechel has halted the 1.1 mtpy DEMZ longs facility due to a “local scrap shortage” and could remain offline until April.

Steel Market Production Increases – Chinese steelmaker Chonggang plans to commission a 1.5 mtpy longs plant in February 2013, bringing total capacity to 8 mtpy.

Steel Market Production Increases – Egyptian steel company IIC plans to start up the upgraded 250,000 tpy Alexandria wire-rod and bar mill by the end of the year.

Steel Market Production Increases – Chinese steelmaker MCC has completed a 1.2 mtpy pre-painted galvanized coil facility in Shandong that contains a 1.2 mtpy CRC mill, two 600,000 tpy pickling lines, two hot-dipped galvanizing lines, a continuous annealing line, and two color-coating lines.

Sources: Steel Business Briefing, American Metal Market

Steel Market Production Report – Environmental Sanctions Impacting Production

November 21, 2012 Posted by Steel Market Intelligence

Steel Market Production Cuts – Italian steelmaker Ilva has idled the 1.8 mtpy plate mill and the 70,000 tpy pipe mill No. 2 due to weak market conditions and may still have to shut down the entire plant if the government’s environmental sanctions are not lifted.

Steel Market Production Cuts – Chinese steelmaker Bayi Iron and Steel has permanently shut down two BOF’s with combined capacity of 1 mtpy due to “excessive emissions.”

Steel Market Production Increases – American pipemaker Welspun Tubular will begin operations at the new 175,000-225,000 tpy ERW OCTG mill in Little Rock, Arkansas in January.

Steel Market Production Cuts – Swiss Steel AG will halt production of the 560,000 tpy EAF at the Emmenbrucke plant until about August 2013, to allow Siemens to make upgrades that will boost capacity to 650,000 tpy.

Steel Market Production Cuts – Chinese steelmaker Yuanda Steel Science and Technology has completed a new 1.2 mtpy cold-rolled sheet facility inBinzhou,Shandong. The company plans to add a pickling line, hot dip galvanizing line, and two color-coating lines in the future.

Steel Market Production Increases – Italian steelmaker AFV Beltrame has decided to restart the merchant bar mill at the San Giovanni Valdarno facility in January, after being closed for about a year. However, the mill is expected to operate at a low production rate.

Sources: Steel Business Briefing, American Metal Market, SteelOrbis

U.S. Rig Count Showing Signs of Life

November 21, 2012 Posted by Steel Market Intelligence

The number of active oil and natural gas rigs in the United States rose for the third straight week, increasing by 8 to 1,817 for the week ending November 21, 2012 – up 0.4% from the previous week but still down some 9.2% from a year-ago.

The highest weekly rig count in the United States since 1940 was recorded on December 28, 1981, at 4,530; the lowest was recorded on April 23, 1999, at 488.

The number of rigs in Canada rose 0.8% to 387 from 384 last week, but was 20.0% below the year-ago level.

The highest rig count for Canada was 727 on February 3, 2006; the lowest was 29, recorded on April 24, 1992.

Source: Baker Hughes Inc.

 

October ABI Hits New Highs; Residential Highest Since April 2005

November 21, 2012 Posted by Steel Market Intelligence

New Report Preview:

The American Institute of Architects’ (AIA) ABI Index – a leading indicator of non-residential construction activity – rose for the fifth consecutive month in October, and for the …more

For a copy of our full report and a free trial subscription, please contact us.

October Global Steel Production Declines

November 20, 2012 Posted by Steel Market Intelligence

New Report Preview:

As global steel demand continued to slide in October, average daily steel production declined 1.5% from September – a bigger drop than the normal sideways seasonal …more

For a copy of our full report and a free trial subscription, please contact us.

Advance/Decliner Index Rises Further on Broad-Based Strength

November 20, 2012 Posted by Steel Market Intelligence

New Report Preview:

Our Advance/Decliner Index rose to an eight-month high as global steel prices trended higher on the back of rising scrap prices and continued strength in China. Our …more

For a copy of our full report and a free trial subscription, please contact us.

Steel Market Production Report – MMK Confirms Outage

November 19, 2012 Posted by Steel Market Intelligence

Steel Market Production Cuts – Russian Steel Company MMK confirmed the 90-day idling of the EAF and hot-strip line at the 2.3 mtpy MMK-Metalurji plant in Turkey. The cold-rolled, galvanized, and coated lines will continue to operate throughout the stoppage.

Sources: Steel Business Briefing