Posts Tagged: ‘global steel’

Iron Ore Price Falls for the Second Consecutive Week

December 3, 2012 Posted by Steel Market Intelligence

The spot reference price for 62% Fe iron ore cfr North China declined for the second straight week, falling 2.8% to $115.60 for the week ending November 30, 2012, and is at the lowest level in six weeks. However, the price is still some 29.9% higher than the recent low of $89.00 on 9/7/2012.

The spot price for iron ore averaged $141.84 in 1Q, $139.35 in 2Q, and $112.12 in 3Q; this compares to an average of $167.59 for full-year 2011.

The post-recession low was $59.10 on March 27, 2009, while the high was $190.19 on February 17, 2011.

Source: The Steel Index

Domestic Raw Steel Production Rises After Thanksgiving Holiday

December 3, 2012 Posted by Steel Market Intelligence

For the week ending December 1, 2012, weekly domestic raw steel production rose 3.1% to a 10-week high of 1.818 million tons (mt), compared to 1.764 mt the previous week – which was most likely affected by the Thanksgiving holiday – and is now up some 8.3% from the recent low of 1.679 for the week of October 27, 2012.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Capacity utilization came in at 73.6%, the highest since late September, and up from 71.4% last week but down from the year-ago level of 74.9%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

Source: AISI and Steel Market Intelligence

U.S. Rig Count Falls After 3 Weeks of Increases

December 3, 2012 Posted by Steel Market Intelligence

The number of active oil and natural gas rigs in the United States fell for the first time in a month – declining by 6 to 1,811 for the week ending November 30, 2012 – down 0.3% from last week and 9.1% from a year ago.

The highest weekly rig count in the United States since 1940 was recorded on December 28, 1981, at 4,530; the lowest was recorded on April 23, 1999, at 488.

The number of rigs in Canada rose for the third straight week – up 3.1% to 399 from 387 last week, but was 17.6% below the year-ago level.

The highest rig count for Canada was 727 on February 3, 2006; the lowest was 29, recorded on April 24, 1992.

Source: Baker Hughes Inc.

Steel Market Production Report – SE Asia Sees Increase in Flat-Rolled Capacity

November 29, 2012 Posted by Steel Market Intelligence

Steel Market Production Increases – China Steel Corp plans to begin production at the new 1.2 mtpy Vietnamese CRC JV by year-end 2013 and it will have capacity for 300,000 tpy of hot-dipped galvanized, 200,000 tpy of NGO silicon steel, and 300,000 tpy of pickled and oiled.

Steel Market Production Increases – Thai steelmaker G Steel believes it is close to receiving financing for a “raw material supply facility” that will allow it to re-start HRC production at its 1.8 mtpy Rayong facility and 1.5 mtpy GJ subsidiary in Chonburi. The company estimates that it will restart production in February and will ramp-up to full production over four months; the plants have been idled since early August.

Steel Market Production Increases – Chinese steelmaker Baogang has plans to upgrade the efficiency of its wide hot strip mill No. 1 at the Baoshan facility in Shanghai by installing a new descaler by mid-2013, with a sizing press and roughing stand scheduled for mid-2014.

Steel Market Production Cuts – Vietnam-based Pomina Steel Corp announced that the “Pomina 3” project for a new longs rolling mill is now on hiatus. Pomina has 1.5 mtpy of billet capacity after commissioning a new plant in March, but only has 1.05 mtpy of rolling capacity. While the long-term goal remains to build a plant that would close the capacity gap, Pomina will sell the excess billet until that plan is feasible.

Sources: Steel Business Briefing

HRC Lead Times Move Off 7-week Low

November 29, 2012 Posted by Steel Market Intelligence

HRC lead times for the week ending November 25 rose to 3.5 from last week’s 3.0.

CRC lead times also rose – coming in at an 11-week high of 6.4 weeks from 6.1 in the week prior. HDG lead times posted the lone decrease, falling to 6.3 from last week’s 3-month high of 6.5.

Sources: The Steel Index, Steel Business Briefing

HRC = Hot Rolled Coil
CRC = Cold Rolled Coil
HDG = Hot Dipped Galvanized

Steel Market Production Report – Ilva Finally Closes, Set for Meeting with Italian Government

November 28, 2012 Posted by Steel Market Intelligence

Steel Market Production Cuts – Italian steelmaker Ilva has announced the closure of the entire 11 mtpy Taranto facility and all down-stream facilities after Italian officials issued a court-order to seize all steel produced over the prior four months. Representatives of Italy’s unions, Ilva’s chairman, the prime minister, and other government officials will meet on Thursday, November 29, in an attempt to resolve the standstill.

Steel Market Production Increases – Severstal North America has restarted the blast furnace at the Dearborn, Michigan facility after finishing repairs. The BF has been offline since November 2 due to the explosion of a cold-air pipe.

Steel Market Production Cuts – The planned restart of Tokyo Steel’s 1.8 mtpy pickling line at the Tahara facility has been pushed back until March of next year. The line has been out of commission since October 15, when a fire broke out at the plant.

Steel Market Production Cuts – Brazilian steelmaker Gerdau is delaying the re-start of the 135,000 tpy Muña longs mill in Colombia from sometime in 2012 to early 2013 due to low demand.

Steel Market Production Increases – Jordanian Taybah Steel will begin production at a new 500,000 tpy rebar facility in Saudi Arabia sometime around August 2013.

Steel Market Production Increases – Chinese pipemaker Fangrui Steel has increased its capacity for welded pipe from 50,000 tpy to 200,000 tpy after the start-up of two new production lines and plans to add an additional 100,000 tpy by year-end 2013.

Steel Market Production Increases – Brazilian steelmaker Gerdau has acquired a 2-strand billet caster for the company’s Mexican (Corsa) operations and plans to begin operations in March 2013, boosting the production run-rate to 400,000 tpy.

Sources: Steel Business Briefing, American Metal Market

November OCTG Prices Continue Down as Margins Become Squeezed on Higher Substrate

November 28, 2012 Posted by Steel Market Intelligence

New Report Preview:

According to Pipe Logix, November OCTG prices declined another $12/ton (or 0.7%) to the lowest since March 2011 as prices for welded and seamless pipe declined…more

For a copy of our full report and a free trial subscription, please contact us.

Advance/Decliner Index Sideways; Flattening of Domestic Sheet Prices Temporary Pause

November 27, 2012 Posted by Steel Market Intelligence

New Report Preview:

After posting four consecutive increases, our Advance/Decliner Index declined from an eight-month high, but remained at elevated levels. The drop was driven by our …more

For a copy of our full report and a free trial subscription, please contact us.

Chinese Steel Production Flash – Mid-November Production Down Nominally

November 27, 2012 Posted by Steel Market Intelligence

New Report Preview:

After rising 1.6% in early November, Chinese steel production estimated by the China Iron & Steel Association (CISA) for the second 10 days of November came in at …more

For a copy of our full report and a free trial subscription, please contact us.

October Steel Imports Post First Increase Since April as Korean Tonnage Soars to New Record

November 27, 2012 Posted by Steel Market Intelligence

New Report Preview:

October preliminary steel imports increased 4.1% to 2.54 million tons (mt) from September’s 2.44 mt, marking the first pick-up in six months driven by increases…more

For a copy of our full report and a free trial subscription, please contact us.