Posts Tagged: ‘Steel Capacity’

Domestic Raw Steel Production Drops to 14-Month Low, Capacity Utilization to 13-Month Low

December 24, 2013 Posted by Steel Market Intelligence

Weekly domestic raw steel production fell 4.7% from 1.818 million tons (mt) last week to 1.733 mt for the week ending December 21, 2013, dropping to the lowest production rate since November 3, 2012.  Production is some 5.8% below the year-ago level of 1.840 mt.

Capacity utilization also fell from 75.9% last week to 72.3% this week, the lowest since November 24, 2012, and is below the year-ago level of 74.5%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Source: AISI and Steel Market Intelligence

Domestic Raw Steel Production, Capacity Utilization Decrease

December 17, 2013 Posted by Steel Market Intelligence

Weekly domestic raw steel production decreased 0.6% from 1.829 million tons (mt) last week to 1.818 mt for the week ending December 14, 2013.  Production is some 0.5% below the year-ago level of 1.827 mt.

Capacity utilization also fell from 76.3% last week to 75.9% this week, but is still above the year-ago level of 73.9%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Source: AISI and Steel Market Intelligence

Domestic Raw Steel Production, Capacity Utilization Climb from Seven-Month Low

November 5, 2013 Posted by Steel Market Intelligence

Weekly domestic raw steel production increased 0.9% from 1.817 million tons (mt) last week to 1.833 mt for the week ending November 2, 2013, rising slightly from last week’s seven-month low.  Production remains some 7.4% above the year-ago level of 1.707 mt.

Capacity utilization also increased from the seven-month low of 75.8% last week to 76.5% this week, and is above the year-ago level of 69.1%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Source: AISI and Steel Market Intelligence

Domestic Raw Steel Production Falls from 6-Month High

March 12, 2013 Posted by Steel Market Intelligence

For the week ending March 9, 2013, weekly domestic raw steel production fell 1.6% to 1.828 million tons (mt) – down from the 6-month high of 1.857 million tons reached last week.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Capacity utilization came in at 76.3%, down from 77.5% last week and from the year-ago level of 79.6%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

Source: AISI and Steel Market Intelligence

Domestic Raw Steel Production Slips

January 28, 2013 Posted by Steel Market Intelligence

For the week ending January 26, 2013, weekly domestic raw steel production fell 0.9% to 1.806 million tons (mt) – but is up 7.6% from the recent low of 1.679 mt for the week of October 27, 2012.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Capacity utilization came in at 75.4%, down from 76.1% last week and from the year-ago level of 77.6%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

Source: AISI and Steel Market Intelligence

 

Domestic Raw Steel Production Posts Largest Decline in a Year

January 8, 2013 Posted by Steel Market Intelligence

For the week ending January 5, 2012, weekly domestic raw steel production fell 3.9% to 1.756 million tons (mt) – the largest drop since October 2011, but is up 4.6% from the recent low of 1.679 mt for the week of October 27, 2012.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Capacity utilization came in at 72.6%, down from 73.9% last week and down from the year-ago level of 76.5% even as AISI revised their total capacity number for 1Q13 to 30.8 million tons from 32.7 in 4Q12 and 32.3 in 1Q12.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

Source: AISI and Steel Market Intelligence

Domestic Raw Steel Production Pulls Back

January 2, 2013 Posted by Steel Market Intelligence

For the week ending December 29, 2012, weekly domestic raw steel production fell 0.7% to 1.827 million tons (mt), but is up 8.8% from the recent low of 1.679 mt for the week of October 27, 2012.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Capacity utilization came in at 73.9%, up from 74.5% last week, but still down from the year-ago level of 75.3%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

Source: AISI and Steel Market Intelligence

 

Domestic Raw Steel Production Declines

December 10, 2012 Posted by Steel Market Intelligence

For the week ending December 1, 2012, weekly domestic raw steel production fell 0.9% to 1.802 million tons (mt), compared to the 10-week high of 1.818 mt recorded the previous week, but is still up some 7.3% from the recent low of 1.679 mt for the week of October 27, 2012.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Capacity utilization came in at 72.9%, down from 73.6% last week and down from the year-ago level of 74.3%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

Source: AISI and Steel Market Intelligence

Domestic Raw Steel Production Falls To 20-Month Low

October 1, 2012 Posted by Steel Market Intelligence

For the week ending September 29, 2012, weekly domestic raw steel production declined 2.4% to 1.780 million tons (mt), the lowest level since January 2011 and came in below 1.8 mt for the first time in the last year.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Capacity utilization fell to 72.0% this week, below last week’s 73.8% and the year-ago level of 72.8%.

The lowest production level since the recession began was 800,000 tons for the week of December 27, 2008, while the highest level was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

Source: AISI and Steel Market Intelligence