Corporate ‘affluenza’—success is a mighty enemy

April 9, 2014 Posted by Steel Market Intelligence

By Michelle Applebaum

It was truly chilling to read the account of a 16-year-old who killed four people while driving drunk. What was far more chilling was the success of his legal team’s creative defense to avoid jail time, what is now being called the “Affluenza” defense: the teenager’s sense of entitlement driven by the material successes of his overly permissive parents left him unable to understand that his actions had consequences.

Historically, not being able to understand the difference between right and wrong has been a successful defense used for those who might be mentally impaired; this was the first time the defense was used for someone whose impairment was driven by no more than the sense of entitlement he derived as a result of his parents’ successes in the material world.

Throughout my 30-plus years following the steel industry, I have seen a kind of “corporate affluenza” that similarly comes as a result of a sense of corporate entitlement that is a result of similar kinds of corporate successes that this youngster’s parents achieved.

Corporate affluenza comes as a result of a number of factors. Worthington Industries Inc. chairman and chief executive officer John P. McConnell quietly coined the phrase “success is a mighty enemy” as a succinct way to describe the phenomenon he observed over his nearly five decades with the company that his father founded in 1955. Despite his team’s success in effecting the company’s turnaround, as evidenced by the near-doubling in the company’s share performance over the past five years, McConnell is as reticent as his father was gregarious, and has had little to say regarding exactly what about Worthington’s success made the very success an enemy of the company’s culture.

So rather than pick on Worthington, I’ll present my own view of what I’ve seen at a number of highly successful companies in and out of the steel industry where I have seen success become a “mighty enemy.”

First, it’s about the culture of being at the top vs. the culture of reaching for the top. A culture of “at the top” creates a well-earned sense of accomplishment, while a culture of “reaching for the top” creates a sense of energy, of can-do. And the new hires at the two types of companies are very different: people who go to work for a company trying to get to the top are naturally very different than the people who go to work at a company that’s already at the top.

Second, it’s about teaming–the human nature of how we bond with those with whom we work. We form teams in the workplace, creating “virtual families” at jobs where we spend nearly half our waking hours (and at achievement-oriented companies, nearly all our waking hours). That bonding often creates a “we vs. they” mentality, kind of a tribal impulse. And while good things come from the teaming, bad things do as well. A cradle-to-grave mentality is simply human nature, and without disciplined oversight these human attachments that form as a result of merit-based team ties often eventually turn into enabling.

Third, it’s about the outsiders that surround the people at a successful company. If the players don’t develop their own sense of entitlement, then often outsiders–ranging from well-intentioned advisors to the more-nefarious sycophants–will often help support the sense of entitlement that success breeds. And by entitling their customers, these advisors can inadvertently sabotage even the most driven meritocracy, moving from performance to enablement. It then becomes hard to separate the wheat from the chaff because outsiders prop up the chaff, supported by the human nature of teammates who ignore the obvious warning signs.

What are the symptoms of corporate affluenza? The same as the drunk driver: a sense of entitlement and arrogance that creates a culture of “we can do no wrong.” How does a corporation ward off this scourge? There are plenty of examples in the steel industry of companies that have grown and been hugely successful while maintaining their culture. Stay humble, cherish those who dare give negative feedback, keep the ideas flowing and–most important–remember where you came from because most tickets are round trip!

Posted in American Metal Market Magazine March/April 2014

Domestic Raw Steel Production, Capacity Utilization Fall to Fifteen-Week Lows

April 8, 2014 Posted by Steel Market Intelligence

Weekly domestic raw steel production decreased 3.2% from 1.820 million tons (mt) last week to 1.762 mt for the week ending April 5, 2014, falling to the lowest rate since December 21, 2013.  Production is also some 5.2% below the year-ago level of 1.858 mt.

Capacity utilization decreased from 75.7% last week to 73.3% this week, which is also a fifteen-week low, and is below the year-ago level of 77.6%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Source: AISI and Steel Market Intelligence

U.S. Rig Count Climbs to Seventeen-Month High, Canadian Rig Count Falls to Nine-Month Low

April 7, 2014 Posted by Steel Market Intelligence

The number of active oil and natural gas rigs in the United States increased 0.5% to 1,818 for the week ending April 4, 2014, up from 1,809 last week and reaching the highest count since October 26, 2012.  The count is some 4.6% above the year-ago level of 1,738.

The highest weekly rig count in the United States since 1940 was recorded on December 28, 1981, at 4,530; the lowest was recorded on April 23, 1999, at 488.

The number of rigs in Canada fell to a nine-month low of 235 this week, dropping 21.1% from 298 last week and decreasing 88.3% over the now-six-week downward spiral.  Despite the fall, the count is some 14.1% above the year-ago level of 206.

The highest rig count for Canada was 727 on February 3, 2006; the lowest was 29, recorded on April 24, 1992.

Source: Baker Hughes Inc.

U.S. Rig Count Decreases Slightly, Canadian Rig Count Falls Further to Eleven-Week Low

March 25, 2014 Posted by Steel Market Intelligence

The number of active oil and natural gas rigs in the United States decreased 0.3% from last week’s sixteen-month high of 1,809 to 1,803 for the week ending March 21, 2014.  The count is still some 3.3% above the year-ago level of 1,746.

The highest weekly rig count in the United States since 1940 was recorded on December 28, 1981, at 4,530; the lowest was recorded on April 23, 1999, at 488.

The number of rigs in Canada fell for the fourth consecutive week, dropping 25.5% from 522 last week to 389 this week, which is an eleven-week low.  Despite the fall, the count is some 15.4% above the year-ago level of 337.

The highest rig count for Canada was 727 on February 3, 2006; the lowest was 29, recorded on April 24, 1992.

Source: Baker Hughes Inc.

Domestic Raw Steel Production, Capacity Utilization Jump to Eight-Month Highs

March 25, 2014 Posted by Steel Market Intelligence

Weekly domestic raw steel production jumped to an almost eight-month high for the week ending March 22, 2014, increasing 3.1% from 1.828 million tons (mt) last week to 1.885 mt.  Production is also some 4.2% above the year-ago level of 1.809 mt.

Capacity utilization rose from 76.0% last week to 78.4% this week, which is also an eight-month high, and is above the year-ago level of 75.5%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Source: AISI and Steel Market Intelligence

Domestic Raw Steel Production, Capacity Utilization Decrease to Six-Week Lows

March 18, 2014 Posted by Steel Market Intelligence

Weekly domestic raw steel production fell 0.7% from 1.840 million tons (mt) last week to a six-week low of 1.828 mt for the week ending March 15, 2014.  Despite the decline, production is some 2.4% above the year-ago level of 1.785 mt.

Capacity utilization decreased from 76.5% last week to 76.0% this week, which is also a six-week low, but is above the year-ago level of 74.5%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Source: AISI and Steel Market Intelligence

U.S. Rig Count Jumps to Sixteen-Month High, Canadian Rig Count Drops to Two-Month Low

March 17, 2014 Posted by Steel Market Intelligence

The number of active oil and natural gas rigs in the United States increased 0.9 % from 1,792 last week to 1,809 for the week ending March 14, 2014, reaching the highest count since November 30, 2012.  The count is some 1.9% above the year-ago level of 1,776.

The highest weekly rig count in the United States since 1940 was recorded on December 28, 1981, at 4,530; the lowest was recorded on April 23, 1999, at 488.

The number of rigs in Canada decreased for the third consecutive week, down 11.1% from 587 last week to 522 this week, dropping to a two-month low.  Despite the fall, the count is some 16.7% above the year-ago level of 503.

The highest rig count for Canada was 727 on February 3, 2006; the lowest was 29, recorded on April 24, 1992.

Source: Baker Hughes Inc.

Domestic Raw Steel Production Decreases from Five-Month High

March 11, 2014 Posted by Steel Market Intelligence

Weekly domestic raw steel production fell 1.1% from last week’s five-month high of 1.861 million tons (mt) to 1.840 mt for the week ending March 8, 2014.  Production is some 0.7% above the year-ago level of 1.828 mt.

Capacity utilization also decreased from 77.4% last week to 76.5% this week.  The rate is just slightly above the year-ago level of 76.3%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Source: AISI and Steel Market Intelligence

U.S. Rig Count Jumps to Fifteen-Month High, Canadian Rig Count Decreases Again

March 10, 2014 Posted by Steel Market Intelligence

The number of active oil and natural gas rigs in the United States increased 1.3 % from 1,769 last week to 1,792 for the week ending March 7, 2014, reaching the highest count since December 14, 2012.  The count is some 2.3% above the year-ago level of 1,752.

The highest weekly rig count in the United States since 1940 was recorded on December 28, 1981, at 4,530; the lowest was recorded on April 23, 1999, at 488.

The number of rigs in Canada decreased 6.2% from 626 last week to 587 this week, falling for a second time after an eight-week climb.  Despite the fall, the count is some 1.2% above the year-ago level of 580.

The highest rig count for Canada was 727 on February 3, 2006; the lowest was 29, recorded on April 24, 1992.

Source: Baker Hughes Inc.

Domestic Raw Steel Production Jumps to Five-Month High, Capacity Utilization to Four-Month High

March 4, 2014 Posted by Steel Market Intelligence

Weekly domestic raw steel production rebounded 1.6% from last week’s 1.831 million tons (mt) to 1.861 mt for the week ending March 1, 2014, reaching the highest rate since October 5, 2013.  Production is some 0.2% above the year-ago level of 1.857 mt.

Capacity utilization also increased from 76.3% last week to 77.4% this week, which is an almost four-month high.  The rate is just slightly below the year-ago level of 77.5%.

The lowest production since the recession began was 800,000 tons for the week of December 27, 2008, while the highest was 2.005 mt for the week of May 12, 2012. The lowest capacity utilization rate since the recession began was 33.5% for the week of December 27, 2008; the highest was 81.1% on May 12, 2012.

We would caution readers that only half of the AISI reporting companies release their weekly production in “real time” so the other half of this data is estimated using the last month’s reported production & operating rate. What this means is that when production is changing, the weekly data is actually understating the change.

Source: AISI and Steel Market Intelligence